C7 Corvette In Tank Fuel System (dual pump)

Total Performance Racing

C7 Corvette In Tank Fuel System (dual pump)

Sale
$ 2,695.50

MAP or static referenced direct injection supply fuel system up to 1000 rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pump under load). Supplies High Pressure Fuel Pump (HPFP) and auxillary port injection or wet nitrous. Includes in-tank supply system that retains OE transfer, fuel level senders, and EVAP functionality, upgraded feed and return lines, high capacity filtration and check valve, flow through t-block direct mounted on HPFP inlet tube, high capacity F2i regulator with provisions for both static and MAP reference, and interior mounted prime button with digital timer for system purge before starting engine.

Fuel system becomes E85 capable by choosing F90000267 or F90000274 fuel pumps AND microglass SSD or stainless filtration.

Tuners are still working out the integration into the OE electrical system. We will provide detailed assistance on function of supplied components; however, we will not provide assistance with integration/tuning unless installed by one of our qualified technicians at our location.

This fuel system will allow fuel to vaporize at the HPFP inlet and places the HPFP at risk for starting dry. Fore Innovations requires the vehicle owner and installer acknowledge and sign our DI Risk Acknowledgement form before shipping any C7 fuel system.

INCLUDES

2014+ Corvette C7 Dual Pump Module
F2i Fuel Pressure Regulator (MAP reference or static)
88mm Inline Fuel Filter
FCV Checkvalve
T-block to direct mount on HPFP
Interior mounted illuminated prime button with digital timer
All fittings, hose, hardware required for typical fuel line plumbing

-35 feet of fuel line (your choice)
-10 billet compression style hose ends
-Qty 4, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billlet straight AN to o-ring fittings
-Qty 1, 3/8 EFI female to ORB-10 male adapter
-Qty 1, AN union with C7 fuel pressure sensor adapter
-Qty 10, hose straps with stainless mounting screws

FITS FOLLOWING MODELS

2014 C7 Corvette (all models)

*Depending on pump arrangement, lower assembly may be larger than tank opening. Partial disassembly must be accomplished in order to install in fuel tank.

NEED ASSISTANCE CHOOSING YOUR OPTIONS?

Please contact our sales team for assistance.

Primary Fuel Pump

Walbro GSS342 [ +$90.00 ]
TI Auto F90000262 [ +$115.00 ]
TI Auto F90000267 [ +$120.00 ]
TI Auto F90000274 [ +$125.00 ]

Secondary Fuel Pump(s)

Walbro GSS342 [ +$90.00 ]
TI Auto F90000262 [ +$115.00 ]
TI Auto F90000267 [ +$120.00 ]
TI Auto F90000274 [ +$125.00 ]

Electrical Upgrade
None (I have my own fuses, wiring, relays, etc)
FC2 Controller with 6 gauge wiring [ +$199.00 ]
FC3 Staged Controller with 4 gauge wiring [ +$239.00 ]
Sealed Delphi Connector and 7' 12 AWG pigtail only [ +$25.00 ]

Fuel Lines

PTFE -8 Feed / Return
Startlite -8 Feed / Return
PTFE -10 Feed / -8 Return [ +$65.00 ]
Startlite -10 Feed, -8 Return [ +$65.00 ]

Filtration Media

Cellulose
Microglass SSD [ +$19.00 ]
Stainless Steel [ +$32.00 ]

Fuel Filter Upgrades

Upgrade to 128mm Filter [ +$30.00 ]
Add billet mounting bracket [ +$40.00 ]
Add filter monitoring gauge and fitting [ +$54.00 ]

System Options

0-100 psi Fuel Pressure Gauge [ +$24.00 ]
Upgrade to multiport F4i regulator [ +$76.00 ]
Honeywell Pressure Switch for FC3 [ +$42.00 ]
Flex fuel sensor intercept fittings [ +$69.00 ]
Boost / Vacuum Manifold Kit [ +$75.00 ]

Tools

Include 6mL tube of Loctite 567 [ +$8.50 ]
Include black touch-up pen [ +$5.00 ]
AN soft jaws and wrench set [ +$62.00 ]

DI Fuel System Risk Acknowledgement

Risk acknowledgment sign before shipping. This form MUST be signed by the owner of the vehicle and the Installer.