Total Performance Racing

Nitrous Extreme Short Block Package 427cid – 11.0:1 C.R. ERL Superdeck 6-Bolt -Aluminum LS Block

  • Sale
  • $ 11,250


LS Superdeck I Short Block combines our legendary Superdeck I block with a bullet proof rotating assembly of up to 454 CI. This is the perfect short block for forced induction, nitrous and high performance N/A racing engines. The truss design of the ERL SUPERDECK I adds unmatched strength and stability to the bock and deck surface. The truss design (shown in the pictures above) involves connecting each pair of head bolts through an aluminum truss. This truss allows the load to be shared across the deck surface minimizing deck deflection. The ERL sleeves are significantly longer and thicker than stock sleeves, this allows for up to a 4.125” stroke and a 4.185” bore. The 6 bolt Superdeck I Short blocks are available with the ultimate in rotating parts with Callies Ultra Billet Rods, Callies Crankshaft and Wiseco or Ross pistons. These short blocks are capable of producing up to 1500HP. ARP main stud kit included and installed.

Product Information

Description

Nitrous Extreme Short Block Package 427cid – 11.0:1 C.R.

 

Pistons

Wiseco

Compression Ratio

11.0:1

Rods

Callies Ultra Billet I-Beam

Crank

Callies Dragon Slayer 4.000″ Stroke

Horse Power Moderate Rating

1100, 1200

Upgrades Included

Coated Main and Rod Bearings, Custom Total Seal Ring Pack, Drill & Tap for 1/2″ head Studs ( Includes ARP 1/2″ head stud kit), ERL valley Window Bays for Lifter Access, Piston Lateral Gas Ports, Upgrade Wrist Pins, Wiseco Piston Armor Plating

Type

Superdeck 6-Bolt -Aluminum LS Block

Assembly Process
Assembled and Inspected Through Out the Process, NOT A Production Line
Final Cleaning of All Passageways and All Components
Torque and Bore Gage Rods for Spec. and Bearing Clearance
Torque and Bore Gage Main Journals for Spec. and Bearing Clearance
Check Pin Fit on Piston and Rod Small End
FILE- FIT Each Piston Ring to Each Cylinder for Proper Gap for Application
Measure All Main and Rod Journals on Crank for Spec.
Measure All Main and Rod Bearings for Thickness
Match Bearings to Journal for Optimum Clearance and Oil Control (NOT PLASTIGAGE Where False Readings Can Occur)
Assemble Short Block Using Dedicated Ring Compressors, Mitutoyo Inspection Tools and Calibrated Torque Wrenches
All Bearings Coated with Assembly Lube to Avoid Dry Start Up
Fully Blueprinted Short Block
Seal in Bag and Coat with WD-40 for Shipment